GPS Receiver Gimbal Mount

The updated design of the GPS Receiver Gimbal Mount installs on the center post and can accommodate either a single GPS receiver, viewable by pilot or co-pilot, or 2 receivers that may be viewed by both pilot and co-pilot. The ball-mount system results in the receivers being adjustable to suit the varied requirements of all crew members. Once the desired locations are achieved, the mount may be locked into position. The gimbal mount is designed to accept the GPS Cradle Mount from the Garmin Yoke Mount, which is either supplied with the GPS unit or can be sold separately as an accessory. With the installation complete, operators may mount their Garmin GPSMAP 296/396/496 GPS receivers in any aircraft, then easily transfer the GPS unit to any aircraft with the DART GPS Gimbal Mount installed. The DART GPS Receiver Gimbal Mount allows GPS receiver units to operate using the antenna supplied with the unit or, optionally, operators may opt for the installation of an external antenna. Additionally, the received unit may run off battery power or be wired to the aircraft system. *Compatible with Garmin GPSMAP 296 / 396 / 496 receivers. Includes provisions for single or dual receiver installation. Accepts GPS cradle mount from Garmin Yoke Mount (customer supplied). 1 kit completes 1 aircraft.