{"title":"Skidtubes - 407","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDART Aerospace's Skidtubes, with patented Round-I-Beam™ technology, are designed to take on extreme loading conditions encountered when landing on uneven grounds and unconventional landing terrain. DART's quality design on these helicopter skids has been proven with more than 1 million landings. 10x stronger and more damage resistant than conventional skidtubes, DART's helicopter landing gear Skidtubes are compatible with OEM Crosstubes. Standard, heavy duty and float compatible alternatives to accomodate different aircraft configurations are available.\u003c\/span\u003e","products":[{"product_id":"oem-skidtube-protector-kit-206l-low-407-low-high-fits-lh-or-rh","title":"OEM Skidtube Protector 206L Low and 407 Low \/ High Fits LH or RH","description":"DART Replacement Wearpad Kits replace existing OEM wearpads on OEM skidtubes. DART Aerospace Skidtube Protector Kits include wearplates to provide additional full-length protection and install underneath DART Aerospace or existing OEM Wearpads.\n\n*Provides additional protection over wearpads alone. 1 kit completes 1 skidtube \u0026amp; consists of 2 Full-length steel wearplates, does not include wearpads. For installation with OEM or DART D407-728-311 Wearpad Kits. Modification to Fwd wearplate required if installing on 407-011-201 \/-202 to ensure compatibility. Price is per skidtube.","brand":"Hawkesbury","offers":[{"title":"Default Title","offer_id":41301646737467,"sku":"D407-728-411","price":605.0,"currency_code":"USD","in_stock":true}]},{"product_id":"oem-skidtube-protector-kit-206l-407-float-gear-fits-lh-or-rh","title":"OEM Skidtube Protector 206L \/ 407 Float Gear Fits LH or RH","description":"DART Replacement Wearpad Kits replace existing OEM wearpads on OEM skidtubes. DART Aerospace Skidtube Protector Kits include wearplates to provide additional full-length protection and install underneath DART Aerospace or existing OEM Wearpads.\n\n*Provides additional protection over wearpads alone. 1 kit completes 1 skidtube and consists of 3 full-length steel wearplates \u0026amp; 2 tungsten carbide welded short wearpads, does not include wearpads. For installation with OEM or DART D407-728-315 Wearpad kits. Price is per skidtube.","brand":"Hawkesbury","offers":[{"title":"Default Title","offer_id":41301646803003,"sku":"D407-728-415","price":1175.0,"currency_code":"USD","in_stock":true}]},{"product_id":"skidtube-lh-high-gear-run-on-landing-dart-apical-tri-bag-float-comp","title":"Skidtube LH, High Gear, Run-on Landing, DART (Apical) Tri-bag Float Comp.","description":"We believe that conventional skidtubes are under-designed for the types of landings most helicopters encounter. Conventional skidtubes are ill-equipped to face the critical loading conditions encountered when landing on uneven ground. Under these conditions, simple round tubes tend to puncture, dent and bend because they cannot maintain their shape. DART Aerospace's revolutionary patented Round-I-Beam™ technology combines the conventional round tube with the strength of the I-beam made from 6061-T6 aluminum. In DART Aerospace skidtubes, the central I-beam web absorbs most of the impact on landing so the tube maintains its integrity. Even with the addition of a central web, the weight is comparable to that of conventional skidtubes. DART Aerospace Run-on Landing Wearplates are specifically designed for the harsh use of training and run-on landings. The run-on landing wearplates feature 2 full-length stainless steel wear bars with more areas of generously overlaid highly wear resistant tungsten carbide as compared to any other available wearplates. The run-on landing wearplates are constructed of stainless steel and feature an easy thru-bolt installation that makes installation or replacement quick and easy, eliminates clamps over the skidtube and prevents the wearplate from rotating on the skidtube. The DART Aerospace run-on landing wearplates come in 2 pieces, which are individually replaceable, and the wearplates are LH\/RH interchangeable, which reduces spares inventory. Run-on landing wearplates are installed at the factory, eliminating the need to source from several vendors and the additional costs for separate shipping and on-site installation. The run-on landing wearplates are installed with a corrosion resistant compound between the skidtube and wearplate (no gaskets or sealant required).\r\n\r\n*Comes complete with saddles, 2 full-length run-on landing wearplates \u0026amp; 2 wearpads, pre-drilled for float compatibility. Compatible with DART \u0026amp; OEM Crosstubes.","brand":"Hawkesbury","offers":[{"title":"Default Title","offer_id":41301649162299,"sku":"D206-642-515","price":22042.0,"currency_code":"USD","in_stock":true}]},{"product_id":"skidtube-rh-high-gear-run-on-landing-dart-apical-tri-bag-float-comp","title":"Skidtube RH,High Gear, Run-on Landing, DART (Apical) Tri-bag Float Comp.","description":"We believe that conventional skidtubes are under-designed for the types of landings most helicopters encounter. Conventional skidtubes are ill-equipped to face the critical loading conditions encountered when landing on uneven ground. Under these conditions, simple round tubes tend to puncture, dent and bend because they cannot maintain their shape. DART Aerospace's revolutionary patented Round-I-Beam™ technology combines the conventional round tube with the strength of the I-beam made from 6061-T6 aluminum. In DART Aerospace skidtubes, the central I-beam web absorbs most of the impact on landing so the tube maintains its integrity. Even with the addition of a central web, the weight is comparable to that of conventional skidtubes. DART Aerospace Run-on Landing Wearplates are specifically designed for the harsh use of training and run-on landings. The run-on landing wearplates feature full-length stainless steel wear bars with more areas of generously overlaid highly wear resistant tungsten carbide as compared to any other available wearplates. The run-on landing wearplates are constructed of stainless steel and feature an easy thru-bolt installation that makes installation or replacement quick and easy, eliminates clamps over the skidtube and prevents the wearplate from rotating on the skidtube. The DART Aerospace run-on landing wearplates come in 2 pieces, which are individually replaceable, and the wearplates are LH\/RH interchangeable, which reduces spares inventory. Run-on landing wearplates are installed at the factory, eliminating the need to source from several vendors and the additional costs for separate shipping and on-site installation. The run-on landing wearplates are installed with a corrosion resistant compound between the skidtube and wearplate (no gaskets or sealant required).\n\n*Comes complete with saddles, 2 full-length run-on landing wearplates \u0026amp; 2 wearpads, pre-drilled for float compatibility. Compatible with DART \u0026amp; OEM Crosstubes.","brand":"Hawkesbury","offers":[{"title":"Default Title","offer_id":41301649227835,"sku":"D206-642-516","price":22042.0,"currency_code":"USD","in_stock":true}]},{"product_id":"skidtube-lh-high-gear-run-on-landing-dartapical-tri-bag-oem-pma-float-comp","title":"Skidtube LH,High Gear, Run-on Landing, DART(Apical) Tri-Bag and OEM\/PMA Float Comp","description":"We believe that conventional skidtubes are under-designed for the types of landings most helicopters encounter. Conventional skidtubes are ill-equipped to face the critical loading conditions encountered when landing on uneven ground. Under these conditions, simple round tubes tend to puncture, dent and bend because they cannot maintain their shape. DART Aerospace's revolutionary patented Round-I-Beam™ technology combines the conventional round tube with the strength of the I-beam made from 6061-T6 aluminum. In DART Aerospace skidtubes, the central I-beam web absorbs most of the impact on landing so the tube maintains its integrity. Even with the addition of a central web, the weight is comparable to that of conventional skidtubes. DART Aerospace Run-on Landing Wearplates are specifically designed for the harsh use of training and run-on landings. The run-on landing wearplates feature full-length stainless steel wear bars with more areas of generously overlaid highly wear resistant tungsten carbide as compared to any other available wearplates. The run-on landing wearplates are constructed of stainless steel and feature an easy thru-bolt installation that makes installation or replacement quick and easy, eliminates clamps over the skidtube and prevents the wearplate from rotating on the skidtube. The DART Aerospace run-on landing wearplates come in 2 pieces, which are individually replaceable, and the wearplates are LH\/RH interchangeable, which reduces spares inventory. Run-on landing wearplates are installed at the factory, eliminating the need to source from several vendors and the additional costs for separate shipping and on-site installation. The run-on landing wearplates are installed with a corrosion resistant compound between the skidtube and wearplate (no gaskets or sealant required).\n\n*Comes complete with saddles, 2 full-length run-on landing wearplates \u0026amp; 2 wearpads, pre-drilled for float compatibility. Compatible with DART \u0026amp; OEM Crosstubes.","brand":"Hawkesbury","offers":[{"title":"Default Title","offer_id":41301649293371,"sku":"D206-642-517","price":20624.0,"currency_code":"USD","in_stock":true}]},{"product_id":"repl-skid-high-gear-run-on-landing-fits-lh-rh-dartapical-tri-bag-float-comp","title":"Repl.Skid.,High Gear,Run-on Landing,Fits LH\/RH, DART(Apical) Tri-Bag Float Comp.","description":"We believe that conventional skidtubes are under-designed for the types of landings most helicopters encounter. Conventional skidtubes are ill-equipped to face the critical loading conditions encountered when landing on uneven ground. Under these conditions, simple round tubes tend to puncture, dent and bend because they cannot maintain their shape. DART Aerospace's revolutionary patented Round-I-Beam™ technology combines the conventional round tube with the strength of the I-beam made from 6061-T6 aluminum. In DART Aerospace skidtubes, the central I-beam web absorbs most of the impact on landing so the tube maintains its integrity. Even with the addition of a central web, the weight is comparable to that of conventional skidtubes. DART Aerospace Run-on Landing Wearplates are specifically designed for the harsh use of training and run-on landings. The run-on landing wearplates feature full-length stainless steel wear bars with more areas of generously overlaid highly wear resistant tungsten carbide as compared to any other available wearplates. The run-on landing wearplates are constructed of stainless steel and feature an easy thru-bolt installation that makes installation or replacement quick and easy, eliminates clamps over the skidtube and prevents the wearplate from rotating on the skidtube. The DART Aerospace run-on landing wearplates come in 2 pieces, which are individually replaceable, and the wearplates are LH\/RH interchangeable, which reduces spares inventory. Run-on landing wearplates are installed at the factory, eliminating the need to source from several vendors and the additional costs for separate shipping and on-site installation. The run-on landing wearplates are installed with a corrosion resistant compound between the skidtube and wearplate (no gaskets or sealant required).\n\n*Comes with 2 full-length run-on landing wearplates \u0026amp; 2 wearpads, pre-drilled for float compatibility. Not included are saddles \u0026amp; hardware. Replacement skidtube for D206-642-515 \/-516 skidtubes.","brand":"Hawkesbury","offers":[{"title":"Default Title","offer_id":41301649719355,"sku":"D206-642-551","price":23856.0,"currency_code":"USD","in_stock":true}]},{"product_id":"repl-skid-high-gear-run-on-landing-fits-lh-rh-dart-tri-bag-oem-pma-float-comp","title":"Repl. Skid.,High Gear,Run-on Landing,Fits LH\/RH, DART Tri-Bag,OEM\/PMA Float Comp","description":"We believe that conventional skidtubes are under-designed for the types of landings most helicopters encounter. Conventional skidtubes are ill-equipped to face the critical loading conditions encountered when landing on uneven ground. Under these conditions, simple round tubes tend to puncture, dent and bend because they cannot maintain their shape. DART Aerospace's revolutionary patented Round-I-Beam™ technology combines the conventional round tube with the strength of the I-beam made from 6061-T6 aluminum. In DART Aerospace skidtubes, the central I-beam web absorbs most of the impact on landing so the tube maintains its integrity. Even with the addition of a central web, the weight is comparable to that of conventional skidtubes. DART Aerospace Run-on Landing Wearplates are specifically designed for the harsh use of training and run-on landings. The run-on landing wearplates feature full-length stainless steel wear bars with more areas of generously overlaid highly wear resistant tungsten carbide as compared to any other available wearplates. The run-on landing wearplates are constructed of stainless steel and feature an easy thru-bolt installation that makes installation or replacement quick and easy, eliminates clamps over the skidtube and prevents the wearplate from rotating on the skidtube. The DART Aerospace run-on landing wearplates come in 2 pieces, which are individually replaceable, and the wearplates are LH\/RH interchangeable, which reduces spares inventory. Run-on landing wearplates are installed at the factory, eliminating the need to source from several vendors and the additional costs for separate shipping and on-site installation. The run-on landing wearplates are installed with a corrosion resistant compound between the skidtube and wearplate (no gaskets or sealant required).\n\n*Comes with 2 full-length run-on landing wearplates \u0026amp; 2 wearpads, pre-drilled for float compatibility. Not included are saddles \u0026amp; hardware. Replacement skidtube for D206-642-517 \/-518 skidtubes.","brand":"Hawkesbury","offers":[{"title":"Default Title","offer_id":41301649784891,"sku":"D206-642-555","price":23846.0,"currency_code":"USD","in_stock":true}]},{"product_id":"skidtube-lh-high-gear-standard-wearplates-dart-apical-tri-bag-float-comp","title":"Skidtube LH,High Gear, Standard Wearplates, DART (Apical) Tri-Bag Float Comp.","description":"We believe that conventional skidtubes are under-designed for the types of landings most helicopters encounter. Conventional skidtubes are ill-equipped to face the critical loading conditions encountered when landing on uneven ground, rocks, tree roots, and other small objects. Under these conditions, simple round tubes tend to puncture, dent and bend because they cannot maintain their shape. DART Aerospace's revolutionary patented Round-I-Beam™ technology combines the conventional round tube with the strength of the I-beam made from 6061-T6 aluminum. In DART Aerospace Skidtubes, the central I-beam web absorbs most of the impact on landing so the tube maintains its integrity. Even with the addition of a central web, the weight is comparable to that of conventional skidtubes. The DART Aerospace Round-I-Beam™ Skidtube was designed to accommodate the extreme conditions involved in military use. Comes standard with full-length tungsten carbide welded wearplates. Also now available with heavier duty run-on landing wearplates that feature 2 full-length stainless steel wear bars with more areas of generously overlaid highly wear resistant tungsten carbide compared to any other available wearplates.\r\n\r\n*Comes complete with saddles, 4 full-length stainless steel wearplates \u0026amp; 10 wearpads, pre-drilled for float compatibility. Compatible with DART \u0026amp; OEM crosstubes.","brand":"Hawkesbury","offers":[{"title":"Default Title","offer_id":41301650210875,"sku":"D206-642-511","price":12890.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/5678\/3419\/products\/d206-642-511_1.jpg?v=1688482686"},{"product_id":"skidtube-rh-high-gear-standard-wearplates-dart-apical-tri-bag-float-comp","title":"Skidtube RH,High Gear, Standard Wearplates, DART (Apical) Tri-Bag Float Comp.","description":"We believe that conventional skidtubes are under-designed for the types of landings most helicopters encounter. Conventional skidtubes are ill-equipped to face the critical loading conditions encountered when landing on uneven ground, rocks, tree roots, and other small objects. Under these conditions, simple round tubes tend to puncture, dent and bend because they cannot maintain their shape. DART Aerospace's revolutionary patented Round-I-Beam™ technology combines the conventional round tube with the strength of the I-beam made from 6061-T6 aluminum. In DART Aerospace Skidtubes, the central I-beam web absorbs most of the impact on landing so the tube maintains its integrity. Even with the addition of a central web, the weight is comparable to that of conventional skidtubes. The DART Aerospace Round-I-Beam™ Skidtube was designed to accommodate the extreme conditions involved in military use. Comes standard with full-length tungsten carbide welded wearplates. Also now available with heavier duty run-on landing wearplates that feature 2 full-length stainless steel wear bars with more areas of generously overlaid highly wear resistant tungsten carbide compared to any other available wearplates.\n\n*Comes complete with saddles, 4 full-length stainless steel wearplates \u0026amp; 10 wearpads, pre-drilled for float compatibility. Compatible with DART \u0026amp; OEM crosstubes.","brand":"Hawkesbury","offers":[{"title":"Default Title","offer_id":41301650243643,"sku":"D206-642-512","price":12890.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/5678\/3419\/products\/d206-642-512_1.jpg?v=1688482694"},{"product_id":"skidtube-lh-low-high-gear-with-run-on-landing-wearplates","title":"Skidtube LH, Low and High Gear with Run-on Landing Wearplates","description":"We believe that conventional skidtubes are under-designed for the types of landings most helicopters encounter. Conventional skidtubes are ill-equipped to face the critical loading conditions encountered when landing on uneven ground. Under these conditions, simple round tubes tend to puncture, dent and bend because they cannot maintain their shape. DART Aerospace's revolutionary patented Round-I-Beam™ technology combines the conventional round tube with the strength of the I-beam made from 6061-T6 aluminum. In DART Aerospace skidtubes, the central I-beam web absorbs most of the impact on landing so the tube maintains its integrity. Even with the addition of a central web, the weight is comparable to that of conventional skidtubes. DART Aerospace Run-on Landing Wearplates are specifically designed for the harsh use of training and run-on landings. The run-on landing wearplates feature full-length stainless steel wear bars with more areas of generously overlaid highly wear resistant tungsten carbide as compared to any other available wearplates. The run-on landing wearplates are constructed of stainless steel and feature an easy thru-bolt installation that makes installation or replacement quick and easy, eliminates clamps over the skidtube and prevents the wearplate from rotating on the skidtube. The DART Aerospace run-on landing wearplates come in 2 pieces, which are individually replaceable, and the wearplates are LH\/RH interchangeable, which reduces spares inventory. Run-on landing wearplates are installed at the factory, eliminating the need to source from several vendors and the additional costs for separate shipping and on-site installation. The run-on landing wearplates are installed with a corrosion resistant compound between the skidtube and wearplate (no gaskets or sealant required).\n\n*Comes complete with saddles, 2 full-length stainless steel run-on landing wearplates. Compatible with DART \u0026amp; OEM Crosstubes.","brand":"Hawkesbury","offers":[{"title":"Default Title","offer_id":41301651685435,"sku":"D206-642-313","price":10640.0,"currency_code":"USD","in_stock":true}]},{"product_id":"skidtube-rh-low-high-gear-with-run-on-landing-wearplates","title":"Skidtube RH, Low and High Gear with Run-on Landing Wearplates","description":"We believe that conventional skidtubes are under-designed for the types of landings most helicopters encounter. Conventional skidtubes are ill-equipped to face the critical loading conditions encountered when landing on uneven ground. Under these conditions, simple round tubes tend to puncture, dent and bend because they cannot maintain their shape. DART Aerospace's revolutionary patented Round-I-Beam™ technology combines the conventional round tube with the strength of the I-beam made from 6061-T6 aluminum. In DART Aerospace skidtubes, the central I-beam web absorbs most of the impact on landing so the tube maintains its integrity. Even with the addition of a central web, the weight is comparable to that of conventional skidtubes. DART Aerospace Run-on Landing Wearplates are specifically designed for the harsh use of training and run-on landings. The run-on landing wearplates feature full-length stainless steel wear bars with more areas of generously overlaid highly wear resistant tungsten carbide as compared to any other available wearplates. The run-on landing wearplates are constructed of stainless steel and feature an easy thru-bolt installation that makes installation or replacement quick and easy, eliminates clamps over the skidtube and prevents the wearplate from rotating on the skidtube. The DART Aerospace run-on landing wearplates come in 2 pieces, which are individually replaceable, and the wearplates are LH\/RH interchangeable, which reduces spares inventory. Run-on landing wearplates are installed at the factory, eliminating the need to source from several vendors and the additional costs for separate shipping and on-site installation. The run-on landing wearplates are installed with a corrosion resistant compound between the skidtube and wearplate (no gaskets or sealant required).\n\n*Comes complete with saddles, 2 full-length stainless steel run-on landing wearplates. Compatible with DART \u0026amp; OEM Crosstubes.","brand":"Hawkesbury","offers":[{"title":"Default Title","offer_id":41301651718203,"sku":"D206-642-314","price":10640.0,"currency_code":"USD","in_stock":true}]},{"product_id":"replacement-skidtube-low-high-gear-run-on-landing-wearplates-fits-lh-or-rh","title":"Replacement Skidtube, Low and High Gear, Run-on Landing Wearplates Fits LH or RH","description":"We believe that conventional skidtubes are under-designed for the types of landings most helicopters encounter. Conventional skidtubes are ill-equipped to face the critical loading conditions encountered when landing on uneven ground. Under these conditions, simple round tubes tend to puncture, dent and bend because they cannot maintain their shape. DART Aerospace's revolutionary patented Round-I-Beam™ technology combines the conventional round tube with the strength of the I-beam made from 6061-T6 aluminum. In DART Aerospace skidtubes, the central I-beam web absorbs most of the impact on landing so the tube maintains its integrity. Even with the addition of a central web, the weight is comparable to that of conventional skidtubes. DART Aerospace Run-on Landing Wearplates are specifically designed for the harsh use of training and run-on landings. The run-on landing wearplates feature full-length stainless steel wear bars with more areas of generously overlaid highly wear resistant tungsten carbide as compared to any other available wearplates. The run-on landing wearplates are constructed of stainless steel and feature an easy thru-bolt installation that makes installation or replacement quick and easy, eliminates clamps over the skidtube and prevents the wearplate from rotating on the skidtube. The DART Aerospace run-on landing wearplates come in 2 pieces, which are individually replaceable, and the wearplates are LH\/RH interchangeable, which reduces spares inventory. Run-on landing wearplates are installed at the factory, eliminating the need to source from several vendors and the additional costs for separate shipping and on-site installation. The run-on landing wearplates are installed with a corrosion resistant compound between the skidtube and wearplate (no gaskets or sealant required).\n\n*Comes with 2 full-length stainless steel run-on landing wearplates. Not included are saddles \u0026amp; hardware. Replacement skidtube for D206-642-313 \/-314 skidtubes.","brand":"Hawkesbury","offers":[{"title":"Default Title","offer_id":41301651750971,"sku":"D206-642-351","price":6318.0,"currency_code":"USD","in_stock":true}]},{"product_id":"skidtube-lh-low-high-gear-with-standard-wearplates","title":"Skidtube LH, Low and High Gear with Standard Wearplates","description":"We believe that conventional skidtubes are under-designed for the types of landings most helicopters encounter. Conventional skidtubes are ill-equipped to face the critical loading conditions encountered when landing on uneven ground, rocks, tree roots, and other small objects. Under these conditions, simple round tubes tend to puncture, dent and bend because they cannot maintain their shape. DART Aerospace's revolutionary patented Round-I-Beam™ technology combines the conventional round tube with the strength of the I-beam made from 6061-T6 aluminum. In DART Aerospace Skidtubes, the central I-beam web absorbs most of the impact on landing so the tube maintains its integrity. Even with the addition of a central web, the weight is comparable to that of conventional skidtubes. The DART Aerospace Round-I-Beam™ Skidtube was designed to accommodate the extreme conditions involved in military use. Comes standard with full-length tungsten carbide welded wearplates. Also now available with heavier duty run-on landing wearplates that feature 2 full-length stainless steel wear bars with more areas of generously overlaid highly wear resistant tungsten carbide compared to any other available wearplates.\n\n*Comes complete with saddles, 3 full-length stainless steel wearplates \u0026amp; 7 wearpads. Compatible with DART \u0026amp; OEM Crosstubes.","brand":"Hawkesbury","offers":[{"title":"Default Title","offer_id":41301652602939,"sku":"D206-642-311","price":6650.0,"currency_code":"USD","in_stock":true}]},{"product_id":"skidtube-rh-low-high-gear-with-standard-wearplates","title":"Skidtube RH, Low and High Gear with Standard Wearplates","description":"We believe that conventional skidtubes are under-designed for the types of landings most helicopters encounter. Conventional skidtubes are ill-equipped to face the critical loading conditions encountered when landing on uneven ground, rocks, tree roots, and other small objects. Under these conditions, simple round tubes tend to puncture, dent and bend because they cannot maintain their shape. DART Aerospace's revolutionary patented Round-I-Beam™ technology combines the conventional round tube with the strength of the I-beam made from 6061-T6 aluminum. In DART Aerospace Skidtubes, the central I-beam web absorbs most of the impact on landing so the tube maintains its integrity. Even with the addition of a central web, the weight is comparable to that of conventional skidtubes. The DART Aerospace Round-I-Beam™ Skidtube was designed to accommodate the extreme conditions involved in military use. Comes standard with full-length tungsten carbide welded wearplates. Also now available with heavier duty run-on landing wearplates that feature 2 full-length stainless steel wear bars with more areas of generously overlaid highly wear resistant tungsten carbide compared to any other available wearplates.\n\n*Comes complete with saddles, 3 full-length stainless steel wearplates \u0026amp; 7 wearpads. Compatible with DART \u0026amp; OEM Crosstubes.","brand":"Hawkesbury","offers":[{"title":"Default Title","offer_id":41301652668475,"sku":"D206-642-312","price":6650.0,"currency_code":"USD","in_stock":true}]},{"product_id":"replacement-skidtube-fits-lh-or-rh","title":"Replacement Skidtube (Fits LH or RH)","description":"We believe that conventional skidtubes are under-designed for the types of landings most helicopters encounter. Conventional skidtubes are ill-equipped to face the critical loading conditions encountered when landing on uneven ground, rocks, tree roots, and other small objects. Under these conditions, simple round tubes tend to puncture, dent and bend because they cannot maintain their shape. DART Aerospace's revolutionary patented Round-I-Beam™ technology combines the conventional round tube with the strength of the I-beam made from 6061-T6 aluminum. In DART Aerospace Skidtubes, the central I-beam web absorbs most of the impact on landing so the tube maintains its integrity. Even with the addition of a central web, the weight is comparable to that of conventional skidtubes. The DART Aerospace Round-I-Beam™ Skidtube was designed to accommodate the extreme conditions involved in military use. Comes standard with full-length tungsten carbide welded wearplates. Also now available with heavier duty run-on landing wearplates that feature 2 full-length stainless steel wear bars with more areas of generously overlaid highly wear resistant tungsten carbide compared to any other available wearplates.\n\n*Comes with full-length stainless steel wearplates \u0026amp; wearpads. Not included are saddles \u0026amp; hardware. Replacement skidtube for D206-642-311 \/ 312 skidtubes.","brand":"Hawkesbury","offers":[{"title":"Default Title","offer_id":41301652701243,"sku":"D206-642-341","price":6318.0,"currency_code":"USD","in_stock":true}]}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/5678\/3419\/collections\/Skidtubes_bd14e4ab-7497-439d-a35a-bb33156726c0.jpg?v=1700232302","url":"https:\/\/dartaerospace.com\/collections\/skidtubes-407\/skidtubes-float-w-standard-wearplates.oembed","provider":"Dart Aerospace","version":"1.0","type":"link"}