{"title":"Fuel and Water Storage \/ Transport","description":"","products":[{"product_id":"batt-multi-fuel","title":"BATT Multi-Fuel","description":"\u003ch4 class=\"wp-block-heading\"\u003eThe next evolution of the world’s most advanced aviation tank\u003c\/h4\u003e\n\u003ch2 class=\"wp-block-heading\"\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe newest addition to SEI’s aviation transport tank line-up is a significant achievement in bulk fuel design. The BATT Multi-Fuel allows operators to switch between flying jet, diesel or gasoline fuel with no compromise to the cost, safety and economical benefits operators have enjoyed since the BATT was first introduced to the world in 2011.\u003c\/p\u003e\n\u003cp\u003eWith the introduction of the original BATT, SEI was able to meet customer demand for a secure, collapsible transport solution designed for specific fuel requirements. Whether its to fly jet, diesel or gasoline fuel, the BATT provides a cost effective and environmentally friendly alternative to steel fuel drums that can be safely transported and stored in aircraft.\u003c\/p\u003e\n\u003cp\u003eFollowing the initial successful introduction of the BATT, SEI was presented with a challenge by one particular customer who had the need to fly both diesel and gasoline fuel. At the time, it was unfeasible to fly different fuel types using the same system given how difficult it can be to store gasoline. This specific scenario required the need to alternate between using  multiple BATT models depending on the fuel type to be flown.\u003c\/p\u003e\n\u003cp\u003eThe SEI Engineering team was given the difficult task of identifying if it was possible to fly multiple fuel types using one BATT system. After a two year research and development process, the answer is finally yes. The new BATT Multi-Fuel will meet the requirements of operators who have a need to fly multiple fuel types in their operations.\u003c\/p\u003e\n\u003ch2 class=\"wp-block-heading\"\u003e\u003cstrong\u003eONE SYSTEM LICENCED FOR 3 FUEL TYPES\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eWith the new Multi-Fuel BATT, SEI proudly becomes the first company to receive a Certificate (SU 12637) to transport diesel, gasoline and jet fuel without special permits using one fuel system.\u003c\/p\u003e\n\u003cp\u003eYou can view the Transport Canada Equivalency Certificate for diesel, gasoline and aviation fuel \u003ca href=\"https:\/\/edbnjkemcyz.exactdn.com\/wp-content\/uploads\/2024\/07\/12637.7-eng-SEIIndustriesLtd.pdf\" rel=\"noreferrer noopener\" target=\"_blank\"\u003ehere\u003c\/a\u003e (disponible en français \u003ca href=\"https:\/\/edbnjkemcyz.exactdn.com\/wp-content\/uploads\/2024\/07\/12637.7-fra-SEIIndustriesLtd.pdf\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eici\u003c\/a\u003e)\u003c\/p\u003e\n\u003cp\u003eThe Multi-Fuel has been approved to carry the following fuel types:\u003c\/p\u003e\n\u003cul class=\"wp-block-list\"\u003e\n\u003cli\u003eAviation Fuel Class 3 UN 1863 Packing Group III\u003c\/li\u003e\n\u003cli\u003eDiesel Fuel Class 3 UN 1202, Packing Group III\u003c\/li\u003e\n\u003cli\u003eGasoline Fuel Class 3, UN 1203 Packing Group II\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SEI Industries","offers":[{"title":"Default Title","offer_id":43511302029371,"sku":null,"price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/5678\/3419\/files\/Bulk-Aviation-Transport-Tank-BATT-Multi-Fuel-1024x391-1.webp?v=1778702098"},{"product_id":"bulk-aviation-transport-tank","title":"Bulk Aviation Transport Tank","description":"\u003ch4\u003eMeet the BATT, the world’s most advanced aviation tank\u003c\/h4\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eWith so many operations located in remote areas with little infrastructure, understandably, fuel supply is a serious business and one of the many reasons why the BATT has quickly become an aviation favorite.\u003c\/p\u003e\n\u003cp\u003eThe creation of the Bulk Aviation Transport Tank (BATT), winner of four technology awards, actually began as a persistent customer request. The customer asked us to produce a collapsible tank for fuel transport, that could fit inside an aircraft. We were already an expert manufacturer of collapsible fuel storage tanks that sit on the ground, but this new tank could be subjected to forces acting during air transportation. It had to be able to withstand any maneuver thrown at it with a design that complied with aircraft technical specifications.\u003c\/p\u003e\n\u003cp\u003eAfter we overcame a number of engineering hurdles, we officially launched the BATT in 2011. We delivered the first tanks to the very client who had initially suggested the product. From there, it wasn’t long before word of the new tank’s capabilities spread amongst air carriers in Canada’s north and, with Transport Canada approval, many quickly purchased the BATT, installed it and had it airborne all over the country.\u003c\/p\u003e\n\u003cp\u003eThanks to the stunningly fast adoption by other carriers around the globe, today, BATTs are in use across five continents including North and South America, Asia, Africa and Europe. From single Otter aircraft to the much larger Boeing 737, the BATT is now available in over 20 different sizes with more being developed.\u003c\/p\u003e\n\u003ch2 class=\"wp-block-heading\"\u003eInnovation Excellence\u003c\/h2\u003e\n\u003cp\u003eThe BATT lets remote operators carry bulk fuel in to their sites. After being emptied, the collapsible tank can be rolled up so that other cargo can be hauled back out. This generates substantial savings in fuel hauling costs.\u003c\/p\u003e\n\u003cp\u003eRecently, SEI unveiled its new Aviation Pump Cart as a teammate to the BATT. Designed for remote airport locations, the Aviation Pump Cart allows one person to easily move the pump and its hoses over rough terrain to refill an aircraft quickly from a portable fuel tank or directly from the BATT.\u003c\/p\u003e\n\u003cp\u003eThe BATT has won four awards to date — an international outstanding achievement award (technical category), an \u003ca href=\"http:\/\/specialtyfabricsreview.com\/2012\/05\/01\/ifai-canada-honours-program-2012-winners-exemplify-quality-craftsmanship\/\"\u003ehonours program award\u003c\/a\u003e (industrial applications category) and a \u003ca href=\"http:\/\/www.cme-mec.ca\/?action=show\u0026amp;lid=JCKNC-E742G-1W6JA\u0026amp;comaction=show\u0026amp;cid=ZVUSZ-T3UHE-FFKL3\"\u003eregional and national award\u003c\/a\u003e for innovative new technology.\u003c\/p\u003e\n\u003ch2 class=\"wp-block-heading\"\u003eInnovation Excellence Licensed in Canada and the United States\u003c\/h2\u003e\n\u003cp\u003eIn the past, only fuel drums were allowed to transport fuel without special permits. We are proud to be the first company to receive a Transportation of Dangerous Goods Equivalency Certificate (SA 10638) from Transport Canada. Because of this Certificate, flight operators can use the BATT for fuel transport without special permits.\u003c\/p\u003e\n\u003cp\u003eThis certificate states that the BATT is limited to supplying fuel to areas with remote access or where other transportation options are not readily available or practical. The fuel must be in a flexible tank that meets all the specifications of the BATT as manufactured by SEI Industries. You can view the Transport Canada Equivalency Certificate for diesel and aviation fuel\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/edbnjkemcyz.exactdn.com\/wp-content\/uploads\/2024\/07\/10638.23-eng-SEIIndustriesLtd.pdf\" rel=\"noreferrer noopener\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e(disponible en français\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/edbnjkemcyz.exactdn.com\/wp-content\/uploads\/2024\/07\/10638.23-fra-SEIIndustriesLtd.pdf\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eici\u003c\/a\u003e) and gasoline\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/edbnjkemcyz.exactdn.com\/wp-content\/uploads\/2024\/07\/11302.8-eng-SEIIndustriesLtd.pdf\" rel=\"noreferrer noopener\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e(disponible en français\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/edbnjkemcyz.exactdn.com\/wp-content\/uploads\/2024\/07\/11302.8-fra-SEIIndustriesLtd.pdf\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eici\u003c\/a\u003e).\u003c\/p\u003e\n\u003cp\u003eTo date, the BATT has been approved to carry the following fuel types:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDiesel Fuel Class 3 UN1202, Packing Group III\u003c\/li\u003e\n\u003cli\u003eAviation Fuel Class 3 UN 1863 Packing Group III\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn the USA, the BATT is approved via special permits by\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.phmsa.dot.gov\/\"\u003ePHMSA.\u003c\/a\u003e\u003c\/p\u003e","brand":"SEI Industries","offers":[{"title":"Default Title","offer_id":43511310221371,"sku":null,"price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/5678\/3419\/files\/SEI_Industries_Bulk_Aviation_Transport_Tank-1-1000x664.webp?v=1778702462"},{"product_id":"double-drum","title":"Double Drum","description":"\u003ch4\u003eCollapsible fuel drum that’s designed to be lifted by helicopter\u003c\/h4\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Double Drum tank is a collapsible fuel drum specifically designed to be helicopter-lifted as a slung load. It’s the ideal replacement for metal drums!\u003c\/p\u003e\n\u003cp\u003eThe Double Drum eliminates empty drums, folds up for quick transport when empty, protects fuel from condensation and is easy to handle. The attachment rings allow it to be tied down as secured cargo in a boat, barge or truck for ground transport. Once on the ground, the tank can also be hand rolled over short distances, making it easy to position on site.\u003c\/p\u003e\n\u003cp\u003eMost importantly, the Double Drum’s unique double-walled design provides abrasion resistance and built-in secondary containment.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThe Double Drum’s inner bladder is made from a 38 oz urethane-coated nylon suitable for storage of diesel and jet fuel. The outer bladder is made from a heavy duty 32 oz OBU that makes it puncture and abrasion resistant.\u003c\/li\u003e\n\u003cli\u003eThe outer tank has D-ring connection\/lifting points on the outer shell to connect to a lifting harness or secure to a boat or ground vehicle. The 250 USG model has 15 connection lifting points while the 500 USG model has 20 connection lifting points. The inner bladder is attached by an aluminum 16-bolt outer ring and is removable for inspection and leak detection.\u003c\/li\u003e\n\u003cli\u003eThe Double Drum is radio-frequency welded and seam sealed. It comes with a 1 1\/2” fill\/drain kit with ball valve, camlock connection and dust cap. Each tank is supplied with a lifting harness to connect to a helicopter or crane.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0590\/5678\/3419\/files\/SEI_Industries_Double_Drum_Specifications.png?v=1778702743\" alt=\"\"\u003e\u003c\/p\u003e","brand":"SEI Industries","offers":[{"title":"Default Title","offer_id":43511320903739,"sku":null,"price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/5678\/3419\/files\/SEI_Industries_Double_Drum-1000x750.webp?v=1778702715"},{"product_id":"fuel-easy","title":"Fuel-Easy","description":"\u003ch4 class=\"wp-block-heading\"\u003eLightweight, flyable fuel containers made especially for helicopters\u003c\/h4\u003e\n\u003ch2 class=\"wp-block-heading\"\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Fuel-Easy makes transporting fuels by helicopter smooth and straightforward. No matter what the climate or conditions, the Fuel-Easy can deliver fuel anywhere it’s needed.\u003c\/p\u003e\n\u003cp\u003eWith its innovative external-frame fabric container, the Fuel-Easy takes much of the risk and guesswork out of fuel hauling. The Fuel-Easy is fully collapsible and offers operators greatly increased fuel hauling capability, easier fuel handling, reduced cost and wastage and the assurance of clean fuel.In use on five continents, this lightweight, flyable fuel container is a convenient and cost-effective alternative to fuel drums.\u003c\/p\u003e\n\u003ch2 class=\"wp-block-heading\"\u003e\u003cstrong\u003eFlying With Fuel-Easy\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eA cargo load that changes shape in flight can be dangerous. The Fuel-Easy flies safely and holds no surprises in flight. Its rigid frame guarantees that the bladder maintains a symmetrical configuration in the air. Unlike fuel drums, the Fuel-Easy tends not to spin on the hook. When flown at partial loads, the bladder collapses into itself, creating the specific amount of aerodynamic drag necessary to fully stabilize the unit in flight. The Fuel-Easy conforms to Transport Canada \u003ca href=\"https:\/\/laws-lois.justice.gc.ca\/eng\/regulations\/SOR-2001-286\/page-27.html#h-1230508\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eTransportation of Dangerous Goods Part 12, Section 12.9, Paragraph 5(c).\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch2 class=\"wp-block-heading\"\u003e\u003cstrong\u003eCONSTRUCTION\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Fuel-Easy is built to endure, providing a superior service life. Its construction includes:\u003c\/p\u003e\n\u003cul class=\"wp-block-list\"\u003e\n\u003cli\u003eFuel bladder – high strength urethane coated nylon\u003c\/li\u003e\n\u003cli\u003eFrame – high strength aluminum, bronze or steel\u003c\/li\u003e\n\u003cli\u003eLeg uprights\/diagonal braces\/stretchers – aluminum or steel pipes\u003c\/li\u003e\n\u003cli\u003eConnector and bottom plates – cast aluminum or manganese bronze\u003c\/li\u003e\n\u003cli\u003eBrace brackets – cast aluminum or manganese bronze\u003c\/li\u003e\n\u003cli\u003eHoop – specially formed square aluminum or steel tube\u003c\/li\u003e\n\u003cli\u003eDetachable components – fixed in place with quick pins\u003c\/li\u003e\n\u003cli\u003eNon-detachable components – bolted with aircraft bolts and nylock nuts\u003c\/li\u003e\n\u003cli\u003eRepairs – dry repair kit (for use in the field)\u003c\/li\u003e\n\u003cli\u003eSpecialty bladders also available for potable water and for a variety of chemicals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"wp-block-heading\"\u003eSPECIFICATIONS\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0590\/5678\/3419\/files\/SEI_Industries_Fuel_Easy_Specifications.webp?v=1778702985\" alt=\"\"\u003e\u003c\/p\u003e","brand":"SEI Industries","offers":[{"title":"Default Title","offer_id":43511339483195,"sku":null,"price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/5678\/3419\/files\/SEI_Industries_Fuel_Easy-1-1000x726.webp?v=1778702966"},{"product_id":"aviation-refueling-pump","title":"Aviation Refueling Pump","description":"\u003ch4\u003ePortable fueling for remote airport locations\u003c\/h4\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eOur refueling pumps provide engineered excellence in a fully integrated system (including a jet fuel filtration coalescer \/ separator) that is designed specifically to meet the most rigorous demands. Available in 50- and 100 USGPM models, each pump option is housed on a skid for easy shipping and deployment.\u003c\/p\u003e\n\u003cp\u003eOptional: Qualified API 1581 Fifth Edition filters are available. When using these filters, the flow rate is reduced approximately 30%.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e50 USGPM Model (189 LPM)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e• Diesel engine drive with standard recoil start (optional electric);\u003cbr\u003e• Jet fuel filtration coalescer \/ separator, self-priming centrifugal 2” pump, optional sample port;\u003cbr\u003e• One filter housing, positive displacement flow meter, grounding cable with clips, differential pressure gauge, stainless steel piping and ball valves, camlock fittings, relief valve, framed with an aluminum roof and wheels \/ handle for portability; and\u003cbr\u003e• Optional fabric rain cover.\u003cbr\u003eDimensions: 47.75” x 34” x 45.5”, 354 lbs;\u003cbr\u003e121cm x 86cm x 116cm, 160 kg.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e100 USGPM Model (378 LPM)\u003ca href=\"https:\/\/seiind.wpengine.com\/products\/aviation-pump-cart\/sei-wheely-pump-favourites-jan2017-6930\/\"\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e• Diesel engine drive with standard recoil start (optional electric);\u003cbr\u003e• Jet fuel filtration coalescer \/ separator, self-priming centrifugal 2” pump, optional sample port;\u003cbr\u003e• Two filter housing, positive displacement flow meter, grounding cable with clips, differential pressure gauge, stainless steel piping and ball valves, camlock fittings, relief valve, framed with an aluminum roof and wheels \/ handle for portability; and\u003cbr\u003e• Optional fabric rain cover.\u003cbr\u003e• When refueling aircraft, an API hose is mandatory.\u003cbr\u003eDimensions: 47.75” x 34” x 45.5”, , 374 lbs;\u003cbr\u003e121cm x 86cm x 116cm, 170 kg.\u003c\/p\u003e","brand":"SEI Industries","offers":[{"title":"Default Title","offer_id":43511353802811,"sku":null,"price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/5678\/3419\/files\/SEI-Industries-Aviation-Refueling-Pump-1.webp?v=1778703249"},{"product_id":"custom-pump-systems","title":"Custom Pump Systems","description":"\u003ch4\u003eCustom pump systems to meet your specific needs\u003c\/h4\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eWe design and assemble self-priming custom pump systems according to individual customer specifications. Complete turnkey systems for remote sites are our specialty with all components engineered and fully integrated to meet your specific requirements for pumping capacity, filtration and metering.\u003c\/p\u003e\n\u003cp\u003eTypical flow rates are 50-250 USGPM (189-946 LPM) with diesel, gasoline or electric-powered models available. Filters and hose assemblies are also available.\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eOPTIONS\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eElectric motor drive\u003c\/li\u003e\n\u003cli\u003eTwo levels of filtration available (ground and aviation)\u003c\/li\u003e\n\u003cli\u003eInlet and outlet ball valves\u003c\/li\u003e\n\u003cli\u003eTotalizing flowmeter\u003c\/li\u003e\n\u003cli\u003eWheels, handles and footstand to convert the standard frame to a handcart\u003c\/li\u003e\n\u003cli\u003eEnclosures\u003c\/li\u003e\n\u003cli\u003eHose, hose reels and nozzles\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SEI Industries","offers":[{"title":"Default Title","offer_id":43511362355259,"sku":null,"price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/5678\/3419\/files\/SEI_Industries_Custom_Pump_System-1-1440x957.webp?v=1778703506"},{"product_id":"diesel-jet-transfer-pump","title":"Diesel Jet Transfer Pump","description":"\u003ch4\u003ePortable transfer pumps for diesel or jet fuel\u003c\/h4\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eOur Jet Transfer Pump is available in 100 or 150 GPM models, each transfer pump model is housed on a skid for easy shipping and deployment. Built to withstand tough terrain but still be easy to handle and redeploy, our pumps are ideal for simple fuel transfers between two points or pumping over long distances. Ready-to-ship inventory of these pumps available.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e100 GPM MODEL (378 LPM)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGreat for simple transfer of fuel between two points\u003c\/li\u003e\n\u003cli\u003eDiesel engine with optional electric start\u003c\/li\u003e\n\u003cli\u003eStandard recoil start\u003c\/li\u003e\n\u003cli\u003eSelf-priming centrifugal 2” pump\u003c\/li\u003e\n\u003cli\u003eInlet and outlet ball valves, pressure relief valve, camlock fittings and roll cage around pump and engine\u003c\/li\u003e\n\u003cli\u003e27” x 25” x 27” (68.5 cm x 63.5 cm x 68.5 cm)\u003c\/li\u003e\n\u003cli\u003e165 lbs (75 kg)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003e150 GPM MODEL (567 LPM)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePerfect for high pressure applications or pumping over long distances\u003c\/li\u003e\n\u003cli\u003eDiesel engine with optional electric start\u003c\/li\u003e\n\u003cli\u003eStandard recoil start\u003c\/li\u003e\n\u003cli\u003eSelf-priming centrifugal 2” pump\u003c\/li\u003e\n\u003cli\u003eCamlock fittings and roll cage around pump and engine\u003c\/li\u003e\n\u003cli\u003e28” x 32” x 31.5” (71 cm x 81 cm x 80 cm)\u003c\/li\u003e\n\u003cli\u003e215 lbs (97.5 kg.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e* Electric start option recommended for cold weather usage.\u003c\/p\u003e","brand":"SEI Industries","offers":[{"title":"Default Title","offer_id":43511372316731,"sku":null,"price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/5678\/3419\/files\/SEI_Industries_Diesel_Jet_Pump-3-1000x664.webp?v=1778703782"},{"product_id":"go-station","title":"GO-Station","description":"\u003ch4 class=\"wp-block-heading\"\u003eTough, compact, transportable fuel modules\u003c\/h4\u003e\n\u003ch2 class=\"wp-block-heading\"\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eWhen there’s no fuel station for a thousand miles, now you can bring your own! Housed inside ISO containers, SEI Industries’ GO-Station fuel modules are capable of providing everything needed to receive and transfer fuel from any bulk fuel storage system.\u003c\/p\u003e\n\u003cp\u003eThe concept is simple – provide a controlled, protected environment to house pumping, filtration, metering and dispensing equipment and build it tough!\u003c\/p\u003e\n\u003cp\u003eCompact and portable, the GO-Station can be shipped by land, sea or air. It’s designed to withstand remote locations like Canada’s high arctic and engineered to be compatible with diesel fuel, jet fuel or lube oils (future models will also allow gas).\u003c\/p\u003e\n\n\u003ch2 class=\"wp-block-heading\"\u003e\u003cstrong\u003eHow It Works\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eInside the GO-Station, all of the necessary equipment to off-load bulk fuel, and then pump, filter and dispense it, is provided within the purpose-built ISO container. Special attention has been paid to ensure the GO-Station can withstand freezing Arctic conditions and remote locations.  Each component has been specifically chosen for the challenging task of operating in tough conditions.\u003c\/p\u003e","brand":"SEI Industries","offers":[{"title":"Default Title","offer_id":43511382409275,"sku":null,"price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/5678\/3419\/files\/SEI_Industries_GO_Station-1440x761.webp?v=1778703955"},{"product_id":"heli-pump-and-slimline","title":"Heli Pump and Slimline","description":"\u003csection id=\"\" class=\"\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch4\u003eA complete fuel pump system in a tiny package\u003c\/h4\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eIn use around the world by military special forces and helicopter operators, the Heli Pump is a complete turnkey electric aviation fuel pumping system in a tiny package. Designed for rapid deployment, the Heli-Pump quickly distributes fuel from almost any source and can be powered by the helicopter’s DC system. It offers two-stage filtration, making it ideal for remote site operations. When not in use, the Heli-Pump can be easily packed and stored inside the cargo area of most helicopters. Choose from a variety of models to suit your needs.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eSLIMLINE HELI-PUMP\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e15 USGPM (57 LPM) 24 VDC, 10 AMP electric pump\u003c\/li\u003e\n\u003cli\u003eFilter\/separator\u003c\/li\u003e\n\u003cli\u003e12 ft. of 1” discharge hose with nozzle\u003c\/li\u003e\n\u003cli\u003e12 ft. of 1” suction hose with camlocks\u003c\/li\u003e\n\u003cli\u003eFlow meter (GPM) or (LPM)\u003c\/li\u003e\n\u003cli\u003eCamlock connection drum stub\u003c\/li\u003e\n\u003cli\u003e12 ft. grounding wire\u003c\/li\u003e\n\u003cli\u003e12 ft. of electric cable (connection to battery)\u003c\/li\u003e\n\u003cli\u003eWater detection paste\u003c\/li\u003e\n\u003cli\u003ePump dims without carrying case: 28.5” x 22” x 11”, 57 lbs (72.4 cm x 56 cm x 28 cm, 26 kg)\u003c\/li\u003e\n\u003cli\u003eTotal pump system dims with carrying case: 32” x 28” x 17”, 117 lbs (82 cm x 72 cm x 43 cm, 53 kg)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003cstrong\u003eHR1210 HELI-PUMP\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e11 USGPM (41 LPM) 12 VDC, 25 AMP electric pump\u003c\/li\u003e\n\u003cli\u003eFilter\/separator\u003c\/li\u003e\n\u003cli\u003e12 ft. of 1” discharge hose with nozzle\u003c\/li\u003e\n\u003cli\u003e12 ft. of 1” suction hose with camlocks\u003c\/li\u003e\n\u003cli\u003eMechanical totalizing flow meter (GPM) or (LPM)\u003c\/li\u003e\n\u003cli\u003eCamlock connection drum stub\u003c\/li\u003e\n\u003cli\u003e12 ft. grounding wire\u003c\/li\u003e\n\u003cli\u003e12 ft. of electric cable (connection to battery)\u003c\/li\u003e\n\u003cli\u003eWater detection paste\u003c\/li\u003e\n\u003cli\u003ePump dims: 20” x 23” x 17.5” – 78 lbs (51 cm x 58 cm x 45 cm – 35 kg)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003cstrong\u003eHR 2410 HELI-PUMP\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e11 USGPM (41 LPM) 24 VDC, 10 AMP electric pump\u003c\/li\u003e\n\u003cli\u003eFilter\/separator\u003c\/li\u003e\n\u003cli\u003e12 ft. of 1” discharge hose with nozzle\u003c\/li\u003e\n\u003cli\u003e12 ft. of 1” suction hose with camlocks\u003c\/li\u003e\n\u003cli\u003eMechanical totalizing flow meter (GPM) or (LPM)\u003c\/li\u003e\n\u003cli\u003eCamlock connection drum stub\u003c\/li\u003e\n\u003cli\u003e12 ft. grounding wire\u003c\/li\u003e\n\u003cli\u003e12 ft. of electric cable (connection to battery)\u003c\/li\u003e\n\u003cli\u003eWater detection paste\u003c\/li\u003e\n\u003cli\u003ePump dims: 20” x 23” x 17.5” – 78 lbs (51 cm x 58 cm x 45 cm – 35 kg)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003cstrong\u003eHR2420 HELI-PUMP\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e20 USGPM (75 LPM) 24 VDC, 30 AMP electric pump\u003c\/li\u003e\n\u003cli\u003eFilter\/separator\u003c\/li\u003e\n\u003cli\u003e12 ft. of 1” discharge hose with nozzle\u003c\/li\u003e\n\u003cli\u003e12 ft. of 1” suction hose with camlocks\u003c\/li\u003e\n\u003cli\u003eMechanical totalizing flow meter (GPM) or (LPM)\u003c\/li\u003e\n\u003cli\u003eCamlock connection drum stub\u003c\/li\u003e\n\u003cli\u003e12 ft. grounding wire\u003c\/li\u003e\n\u003cli\u003e12 ft. of electric cable (connection to battery)\u003c\/li\u003e\n\u003cli\u003eWater detection paste\u003c\/li\u003e\n\u003cli\u003ePump dims: 20” x 23” x 17.5” – 112 lbs (51 cm x 58 cm x 45 cm – 50 kg)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection\u003e\u003c\/section\u003e\n\u003csection\u003e\u003c\/section\u003e","brand":"SEI Industries","offers":[{"title":"Default Title","offer_id":43511389257787,"sku":null,"price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/5678\/3419\/files\/SEI_Industries_Heli-Pump-1440x957.webp?v=1778704202"},{"product_id":"vehicle-refueling-pumps","title":"Vehicle Refueling Pumps","description":"\u003ch4\u003eDesigned specifically for diesel vehicle refueling\u003c\/h4\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eOur vehicle refueling pumps provide durable construction and a fully integrated system designed specifically to meet your pumping capacity, filtration and metering needs. With three models to choose from, each pump option is housed on a skid and all models have a welded bottom (with drain) that prevents minor spill and drips. Ready-to-ship inventory of these pumps available.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e30 GPM MODEL (113 LPM)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDiesel engine drive with standard recoil start (optional electric)\u003c\/li\u003e\n\u003cli\u003eSelf-priming centrifugal 2” pump, one filter housing, rotary flow meter, grounding cable with clips (optional ground reel with static bonding), differential pressure gage, brass inlet and outlet ball valves, camlock fittings, relief valve, framed with an aluminum roof and wheels\/handle, optional fabric rain cover.\u003c\/li\u003e\n\u003cli\u003e47.75” x 34” x 45.5” (121 cm x 86 cm x 116 cm)\u003c\/li\u003e\n\u003cli\u003e350 lbs. (160 kg.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003e60 GPM MODEL (227 LPM)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDiesel engine drive with standard recoil start (optional electric)\u003c\/li\u003e\n\u003cli\u003eSelf-priming centrifugal 2” pump, two filter housing, positive displacement flow meter, grounding cable with clips (optional ground reel with static bonding), differential pressure gage, brass inlet and outlet ball valves, camlock fittings, relief valve, framed with an aluminum roof and wheels\/handle, optional fabric rain cover.\u003c\/li\u003e\n\u003cli\u003e47.75” x 34” x 45.5” (121 cm x 86 cm x 116 cm)\u003c\/li\u003e\n\u003cli\u003e400 lbs. (180 kg.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003e90 GPM MODEL (340 LPM)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDiesel engine drive with standard recoil start (optional electric)\u003c\/li\u003e\n\u003cli\u003eSelf-priming centrifugal 2” pump, three filter housing, meter, grounding cable with clips (optional ground reel with static bonding), differential pressure gage, brass inlet and outlet ball valves, camlock fittings, relief valve, framed with an aluminum roof and wheels\/handle, optional fabric rain cover.\u003c\/li\u003e\n\u003cli\u003e47.75” long x 33.5” wide x 45.5” high (121 cm x 85 cm x 116 cm)\u003c\/li\u003e\n\u003cli\u003e500 lbs. (227 kg.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: Dimensions subject to change without notice.\u003c\/p\u003e","brand":"SEI Industries","offers":[{"title":"Default Title","offer_id":43511410851899,"sku":null,"price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/5678\/3419\/files\/SEI_Industries_Vehicle_Refueling_Pump-1-1000x664.webp?v=1778704793"},{"product_id":"f34ds-fuel-system","title":"F34DS Fuel System","description":"\u003ch4\u003eDeploy anywhere you need F34 fuel storage and distribution\u003c\/h4\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe F34DS is a robust fuel storage and distribution system, housed in a 20’ ISO sea container, designed to be deployed into combat zones anywhere by air, rail, truck or ship. Offering tough containment to meet harsh conditions, the F34DS is an advanced support tool for any military force.\u003c\/p\u003e\n\u003cp\u003eDesigned to refuel land vehicles or light aircraft isolated from a main fuel farm, the F34DS offers a standby tank that can be refilled by bowsers while refueling two vehicles. It has onboard API filtration, white and red (tactical) lighting and an explosion-proof electrical system that enables two units to be connected together. All tools required for operation are stored onboard in cabinets, making the self-sufficient F34DS your portable gas station — all located inside one sea container!\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eConstructed To Endure\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for Canadian military specifications\u003c\/li\u003e\n\u003cli\u003eCustom-built 20’ ISO sea container\u003c\/li\u003e\n\u003cli\u003eAll stainless steel piping\u003c\/li\u003e\n\u003cli\u003eCSA certified Class 1 Division 1\u003c\/li\u003e\n\u003cli\u003eExplosion-proof lighting and controls\u003c\/li\u003e\n\u003cli\u003eExplosion-proof electrical connectors\u003c\/li\u003e\n\u003cli\u003eChemical Agent Resistant Coating (CARC)\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"SEI Industries","offers":[{"title":"Default Title","offer_id":43511420387387,"sku":null,"price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/5678\/3419\/files\/SEI_Industries_F34DS-1-1000x664.webp?v=1778705067"},{"product_id":"forward-arming-and-refueling-point-farp","title":"Forward Arming and Refueling Point (FARP)","description":"\u003ch4\u003eForward arming and refueling point (FARP) systems\u003c\/h4\u003e\n\u003cp\u003eSEI specializes in designing fast, mobile, forward-deployed fuel systems for austere conditions. Our systems are available as Fixed-Wing (FW) or Rotary-Wing (RW) supplied FARPs.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eA Forward Arming and Refueling Point (FARP) is designed to provide fuel and ordnance necessary for highly-mobile and flexible helicopter and fixed-wing operations. The size of the FARP varies with the mission and the number of aircraft to be serviced.\u003c\/p\u003e\n\u003cp\u003eSome common design challenges for FARPS include the following points:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAlmost all FARPS are established in austere conditions that can include arctic, desert or jungle environments.\u003c\/li\u003e\n\u003cli\u003eThey have no local fuel storage or pumping facilities available.\u003c\/li\u003e\n\u003cli\u003eThey often use unimproved runways that may be gravel or require short takeoff and landing.\u003c\/li\u003e\n\u003cli\u003eFARPs operate with minimum ground personnel and little or no heavy lifting equipment available.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eTime is of the essence which means that it’s essential products must be designed for rapid deployment.\u003c\/li\u003e\n\u003cli\u003eFARPS are resupplied from Fixed Operating Base (FBO) by aircraft. Space on the aircraft is limited so maximizing the aircraft’s delivery capabilities is also essential.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll FARPS typically use diesel fuel pumping equipment to transfer fuel from portable fuel storage tanks to replenish small aircraft involved in Intelligence, Surveillance, Reconnaissance (ISR), and Direct Action\/Enforcement (DA\/DE) roles. Filtration skids with totalizing flow meters are used to ensure the right amount of clean fuel is dispensed to the aircraft. Deadman stops, control systems, spill kits, fire suppression equipment and additive skids are optional.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFixed-Wing FARP\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eOur FW-FARPs rely on SEI’s Bulk Aviation Transport Tanks (BATT) to transport bulk liquid fuels to forward areas from an FBO. The BATT is a double-walled collapsible fuel bladder that is designed to be installed inside the fixed wing aircraft. It utilizes the aircraft’s existing tie down hard points to secure the tank to the aircraft.\u003c\/p\u003e\n\u003cp\u003eThe BATT has baffles inside the inner tank to minimize liquid surge and a built-in harness system on the outer tank to secure the BATT to the aircraft. The BATT can be installed in minutes, allowing the aircraft to maintain its multi-mission role. Depending on the size of the BATT, the aircraft can carry fuel and refueling equipment in a single trip to rapidly establish a new FARP.\u003c\/p\u003e\n\u003cp\u003eOnce the aircraft carrying the BATT arrives on scene, fuel is then pumped from the BATT to collapsible fuel storage tanks on the ground. In some cases, a palletized BATT can be used. In these operations, the BATT is strapped to a standard 463 L pallet and the whole pallet is dropped off with the BATT full of fuel.\u003c\/p\u003e\n\u003cp\u003eOnce the fuel is transferred to the static storage tanks, the aircraft can return to the FBO for more fuel or can be quickly converted for other missions.\u003c\/p\u003e\n\u003cp\u003eEach FW-FARP can be customized to an aircraft platform and may include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBulk Aviation Transport Tank (BATT) or palletized Bulk Aviation Transport Tank (BATT)\u003c\/li\u003e\n\u003cli\u003eCollapsible storage tanks with secondary containment berms\u003c\/li\u003e\n\u003cli\u003eDouble-walled collapsible storage tanks with integrated secondary containment\u003c\/li\u003e\n\u003cli\u003eDiesel power pump skid\u003c\/li\u003e\n\u003cli\u003eFiltration and metering skid\u003c\/li\u003e\n\u003cli\u003eSuction hoses\u003c\/li\u003e\n\u003cli\u003eDischarge hoses (lay flat or rigid)\u003c\/li\u003e\n\u003cli\u003eManifold system to interconnect tanks and facilitate recirculation of fuel\u003c\/li\u003e\n\u003cli\u003eOver-wing or closed circuit refueling nozzles\u003c\/li\u003e\n\u003cli\u003eOperations manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eRotary-Wing FARP\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eRW-FARPs are designed around helicopter assets that offer vertical take-off and landing (VTOL) capabilities. These systems may utilize underslung tanks such as the Fuel-Easy or the Double Drum or a Bulk Aviation Transport Tank (BATT) to provide bulk fuel to the FARP.\u003c\/p\u003e\n\u003cp\u003eIf Fuel-Easy or Double Drum tanks are utilized, they may be dropped off full at the site by the helicopter without landing. They can also be used as temporary static storage tanks.\u003c\/p\u003e\n\u003cp\u003eTypically, these systems include multiple tanks so replenishment can continue, as one tank is used at the FARP, a second is being filled at the FBO and a third is in transit to or from the FARP. Helicopters transport the empty tanks back to the FBO as underslung loads or the tanks are collapsed and carried back as cargo.\u003c\/p\u003e\n\u003cp\u003eIf the BATT is utilized, the fuel is pumped from the BATT, installed inside the aircraft, to collapsible fuel storage tanks on the ground. If the BATT is used, the helicopter must land to defuel the BATT.\u003c\/p\u003e\n\u003cp\u003eEach RW-FARP can be customized to a helicopter type and may include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFuel-Easy (minimum of three recommended)\u003c\/li\u003e\n\u003cli\u003eDouble Drum (minimum of three recommended)\u003c\/li\u003e\n\u003cli\u003eBulk Aviation Transport Tank (BATT)\u003c\/li\u003e\n\u003cli\u003eCollapsible storage tanks with secondary containment berms\u003c\/li\u003e\n\u003cli\u003eDouble-walled collapsible storage tanks with integrated secondary containment\u003c\/li\u003e\n\u003cli\u003eDiesel power pump skid\u003c\/li\u003e\n\u003cli\u003eFiltration and metering skid\u003c\/li\u003e\n\u003cli\u003eSuction hoses\u003c\/li\u003e\n\u003cli\u003eDischarge hoses (lay flat or rigid)\u003c\/li\u003e\n\u003cli\u003eManifold system to interconnect tanks and facilitate recirculation of fuel\u003c\/li\u003e\n\u003cli\u003eOver-wing or closed circuit refueling nozzles\u003c\/li\u003e\n\u003cli\u003eOperations manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSEI is capable of customizing each FARP with the goal of maximizing fuel delivery to forward areas based on different aircraft configurations. Common off-the-shelf components are used in modular refueling system designs that are compact, lightweight, portable and durable.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eCategory Numbers\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDun \u0026amp; Bradstreet (DUNS): 24-313-6116\u003c\/li\u003e\n\u003cli\u003eCage Code: 0CAE9\u003c\/li\u003e\n\u003cli\u003eProcurement Business No (PBN): 104774930 PG0001\u003c\/li\u003e\n\u003cli\u003eUnited Nations: 3226\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SEI Industries","offers":[{"title":"Default Title","offer_id":43511427072059,"sku":null,"price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/5678\/3419\/files\/SEI_Industries_Forward_Arming_Refueling_Point-1-1000x667.webp?v=1778705404"},{"product_id":"fuel-storage-and-distribution-system-fsds","title":"Fuel Storage and Distribution System (FSDS)","description":"\u003ch4\u003eLarge scale fuel storage and distribution\u003c\/h4\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Fuel Storage and Distribution System (FSDS) is designed to provide safe, efficient storage and distribution for 360,000 liters of bulk fuel. It comes with everything needed to set up an initial fuel storage system in two 20 ft. ISO containers. Not only is it designed to be rapidly deployed and ready to operate in all environments, the FSDS is also ideal for combat support, green field camp installation and emergency humanitarian aid missions.\u003c\/p\u003e\n\u003cp\u003eThe tank farm consists of four 90,000 liter bladder tanks (Arctic King tanks*) suitable for the containment of fuels. This includes four Insta-Berm frame-supported berms, Sunshades and RainDrains. A 100 US gallon-per-minute (GPM) electric-driven pump fills the system and a 40 US GPM electric-driven pump discharges fuel from the system. Both of these electric-driven systems have auxiliary fuel-driven units to be used in case of electric-power disruption or during initial deployment when electric power may not be available.\u003c\/p\u003e\n\u003cp\u003eA filtration skid with a totalizing flow meter ensures that only clean fuel enters the system. In addition, two dual hose reel skids with filtration and totalizing flow meters enable dispensing for up to four vehicles at a time. Various nozzles are provided to enable filling of ground vehicles, tanker trucks or small aircraft.\u003c\/p\u003e\n\u003cp\u003eFor each mechanical skid, portable secondary containment is provided. Flexible hoses are also provided to connect the entire system together via manifolds built onto each filling and dispensing skid.\u003c\/p\u003e\n\u003cp\u003e*Depending on location and climate of deployment, Arctic King tanks may be substituted for Desert King tanks or Jungle King tanks.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eCombat Tough\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for Canadian military specifications\u003c\/li\u003e\n\u003cli\u003eProvides initial bulk fuel storage that can be increased as the mission footprint increases\u003c\/li\u003e\n\u003cli\u003eProvides constant clean filtered fuels\u003c\/li\u003e\n\u003cli\u003eRapidly deployable with a small team\u003c\/li\u003e\n\u003cli\u003eProvides transferring capabilities to small ground vehicles and to small aircraft\u003c\/li\u003e\n\u003cli\u003eProvides bulk transferring to, and bulk receiving from, tanker trucks\u003c\/li\u003e\n\u003cli\u003eOperates in extreme environments\u003c\/li\u003e\n\u003cli\u003eEnables storage and distribution of JP-8, F-34 and F-54 fuels (can be configured for other fuels).\u003c\/li\u003e\n\u003cli\u003eCapable of receiving fuel while dispensing fuel with dedicated transfer pumps\u003c\/li\u003e\n\u003cli\u003eSystem uses electric driven transfer pumps but contains diesel powered back up in the event of power loss\u003c\/li\u003e\n\u003cli\u003eIncludes all necessary tools for installation and maintenance\u003c\/li\u003e\n\u003cli\u003eIncludes all spare parts for emergency maintenance\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SEI Industries","offers":[{"title":"Default Title","offer_id":43511437426747,"sku":null,"price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/5678\/3419\/files\/SEI_Industries_Fuel_Storage_Distribution_System-1-1000x750.webp?v=1778705691"},{"product_id":"high-pressure-aviation-refueling-system-hpars","title":"High Pressure Aviation Refueling System (HPARS)","description":"\u003ch4\u003eFlexible support for aerial operations\u003c\/h4\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe 200 USGPM High Pressure Aviation Refueling System – or HPARS Military Model –  is designed to provide flexible support for aerial operations where fueling and de-fueling of aircraft and tanker trucks using NATO F34 fuel is required. HPARS is also designed to connect to the flexible tanks of the Fuel Storage and Distribution System (FSDS).\u003c\/p\u003e\n\u003cp\u003eThe system uses a self-priming centrifugal pump driven by an electric motor. Filtration is provided by a horizontal filter separator per API Group II Class B. A flow meter is included to measure the amount of fuel delivered and to determine the velocity of fuel flow during de-fueling operations.\u003c\/p\u003e\n\u003cp\u003eThe HPARS system is rated for a maximum flow rate of 800 liters (200 USG) per minute. A manually-operated globe valve controls flow. The exterior steel enclosure is painted in CARC (chemical agent resistant coating).\u003c\/p\u003e\n\n\u003ch2\u003e\u003cstrong\u003eCombat Tough\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for Canadian military specifications\u003c\/li\u003e\n\u003cli\u003eProvides high capacity pressure refueling\u003c\/li\u003e\n\u003cli\u003eRoll up and cabinet style access doors provide easy access for operation and maintenance\u003c\/li\u003e\n\u003cli\u003eAll stainless steel piping\u003c\/li\u003e\n\u003cli\u003eExplosion-proof lighting and controls\u003c\/li\u003e\n\u003cli\u003eExplosion-proof electrical connectors\u003c\/li\u003e\n\u003cli\u003eChemical Agent Resistant Coating (CARC)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SEI Industries","offers":[{"title":"Default Title","offer_id":43511446011963,"sku":null,"price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/5678\/3419\/files\/SEI_Industries_High_Pressure_Aviation_Refueling_System-1-1000x562.webp?v=1778705979"},{"product_id":"arctic-king-fuel-bladder","title":"Arctic King Fuel Bladder","description":"\u003cdiv\u003e\n\u003ch4\u003eCold weather fuel bladder tanks designed to withstand harsh Arctic conditions\u003c\/h4\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Arctic King collapsible fuel bladder tank is specifically designed for liquid fuel storage in sub-zero climates to -50F or -46C. Constructed from a proprietary high-durability fabric unique to SEI Industries, this fuel bladder tank has excellent UV and hydrolysis resistance for a longer life expectancy than any other urethane collapsible fabric tank in the arctic. With all these features, plus its one-way vent system to handle deep snowfalls, the Arctic King is ideally suited for even the most extreme arctic conditions.\u003c\/p\u003e\n\u003cp\u003eThese bladder tanks combine portability and versatility with economy and are available in a full range of sizes from 250 USG (1000 L) to 33,000 USG (125,000 L). By connecting multiple King pillow tanks together, through a manifold system, you can create a cost-effective tank farm with unlimited capacity.\u003c\/p\u003e\n\u003cp\u003eSEI Industries can supply the Arctic King as a stand-alone product or as part of a complete turnkey arctic fuel system which includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrimary storage tank with arctic vent and fill\/drain connections\u003c\/li\u003e\n\u003cli\u003eSecondary containment berm\u003c\/li\u003e\n\u003cli\u003eRainwater filter system\u003c\/li\u003e\n\u003cli\u003eFuel transfer, metering and filtration equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eAbout the Fabric\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eArctic King tanks are constructed from fabric which was purpose-engineered by SEI for above-ground storage of fuels in arctic climates at remote sites. The fabric has a low cold-crack temperature below -50F or -46C. It was developed to withstand long duration fuel exposure. Further, it meets the \u003ca href=\"http:\/\/shop.csa.ca\/en\/canada\/fuel-burning-equipment\/b837-14\/invt\/27036272014\"\u003eCAN\/CSA B-837-14\u003c\/a\u003e standard for collapsible fabric storage tanks (bladders). The Arctic fabric we use exceeds all US military specifications and provides a number of advantages that ultimately help to preserve fuel quality and extend equipment life and safety.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/bpdirectory.intertek.com\/pages\/DLP_SearchDetail.aspx?SpecID=35803\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eVerify our Intertek certification here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cimg class=\"size-full wp-image-1628 aligncenter ls-is-cached lazyloaded\" src=\"https:\/\/edbnjkemcyz.exactdn.com\/wp-content\/uploads\/2020\/11\/Intertek-ETL-17146-with-reg_v2.jpg?strip=all\u0026amp;lossy=1\u0026amp;quality=85\u0026amp;sharp=1\u0026amp;ssl=1\" alt=\"\" width=\"240\" height=\"164\" data-src=\"https:\/\/edbnjkemcyz.exactdn.com\/wp-content\/uploads\/2020\/11\/Intertek-ETL-17146-with-reg_v2.jpg?strip=all\u0026amp;lossy=1\u0026amp;quality=85\u0026amp;sharp=1\u0026amp;ssl=1\" loading=\"lazy\" decoding=\"async\" data-eio-rwidth=\"240\" data-eio-rheight=\"164\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"SEI Industries","offers":[{"title":"Default Title","offer_id":43513415860283,"sku":null,"price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/5678\/3419\/files\/SEI_Industries_Arctic_King_Tank-1.webp?v=1778761987"},{"product_id":"desert-king-fuel-bladder","title":"Desert King Fuel Bladder","description":"\u003ch4\u003eField-tested and proven in deserts throughout the world\u003c\/h4\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Desert King collapsible bladder tank was specifically designed for liquid fuel storage in desert environments. Constructed from a proprietary high-durability fabric unique to SEI Industries, it has excellent UV and high temperature resistance for a longer life expectancy than any other urethane collapsible fabric tank for the desert.\u003c\/p\u003e\n\u003cp\u003eWith all these features, the Desert King is ideally suited for even the most challenging desert conditions. Combining portability and versatility with economy, they are available in a full range of sizes from 250 USG (1000 L) to 33,000 USG (125,000 L). Multiple King tanks can be connected together through a manifold system to create a cost-effective tank farm with unlimited capacity.\u003c\/p\u003e\n\u003cp\u003eSEI Industries can supply the Desert King as a stand-alone product or as part of a complete turnkey desert fuel system which includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrimary storage tank with desert vent\u003c\/li\u003e\n\u003cli\u003eSecondary containment berm\u003c\/li\u003e\n\u003cli\u003eRainwater filter system\u003c\/li\u003e\n\u003cli\u003eFuel transfer, metering and filtration equipment\u003c\/li\u003e\n\u003cli\u003eSunShade protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/h4\u003e\n\u003ch4\u003e\u003cstrong\u003eAbout the Fabric\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eDesert King tanks are constructed from a fabric that was purposely engineered by SEI for above-ground storage of fuels in desert climates at remote sites. The certified proprietary fabric is double-offset coated to provide the lowest diffusion rates in the industry and meets the \u003ca href=\"http:\/\/shop.csa.ca\/en\/canada\/fuel-burning-equipment\/b837-14\/invt\/27036272014\"\u003eCAN\/CSA-B837-14 standard\u003c\/a\u003e for collapsible fabric storage tanks (bladders). This is an important aspect in desert climates where temperatures can cause excess vapour accumulation. Double-offset coating significantly slows this damaging condition and lengthens service life.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/bpdirectory.intertek.com\/pages\/DLP_SearchDetail.aspx?SpecID=35803\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eVerify our Intertek certification here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eExclusive Desert King fabric exceeds US military specifications which provides a number of advantages that ultimately help to preserve fuel quality and extend equipment life and safety.\u003c\/p\u003e","brand":"SEI Industries","offers":[{"title":"Default Title","offer_id":43513424019515,"sku":null,"price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/5678\/3419\/files\/SEI_Industries_Desert_King-1-1-1000x750_1.webp?v=1778762484"},{"product_id":"fuel-tank-monitoring-system","title":"Fuel Tank Monitoring System","description":"\u003ch4\u003eCONSISTENT MEASUREMENT AND MONITORING WITH\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.tacfuels.com\/\" rel=\"noreferrer noopener\" targe=\"_blank\"\u003eTACFUELS®\u003c\/a\u003e\n\u003c\/h4\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eSEI Industries’ exclusive TacFuels fuel tank monitoring option is now available on its premium King series of collapsible fuel tanks (Arctic King, Desert King and Jungle King). The TacFuels system enables timely and accurate record keeping and provides daily local inventory reconciliation with audit and documentation trails. This innovative technological solution provides reliable and precise digital monitoring, removing the inconsistencies associated with manual measurement.\u003c\/p\u003e\n\u003cp\u003eUsing TacFuels data collection units, flow meters and fuel gauges combined with laptop and handheld computers operating TacFuels software, information from any tank can be shared across networks using secure communications. Alarm monitoring also alerts the operator to unwanted changes or potential issues with the tank.\u003c\/p\u003e\n\n\u003ch2\u003e\u003cstrong\u003eHow It Works\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eFuel Tank Monitoring with the TacFuels system works by taking hydrostatic pressure readings which are then adjusted for temperature. This data is collected and sent to a data unit that can be configured to support multiple fuel gauges.\u003c\/p\u003e\n\u003cp\u003eUp to four gauges can be connected in series (daisy chained) from a single power and communications port on the data unit. For large installations or tank farms, multiple data units can be used.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eData Collection \u0026amp; Transfer\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eLaptop computers manage, reconcile and report inventories while handheld computers are used at the fuel point to request measurements and collect transaction data. Mobile computing reduces the errors associated with manual data recording and calculations from a paper-based process.\u003c\/p\u003e\n\u003cp\u003eAll recorded fuel tank monitoring data is uploaded to the laptop which automatically populates the transaction records into dedicated software.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eAlarm Management\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe TacFuels system provides the operator with pre-configured alarm settings for each tank which are enabled during installation. The powerful fuel tank monitoring software constantly monitors the system to check for conditions that may require immediate attention such as overfill or a decreasing level on a static tank.\u003c\/p\u003e\n\u003cp\u003eWhen an alarm situation occurs, the operator is notified and an alarm summary display allows the operator to quickly acknowledge the alarm and find out why the alarm occurred. The system software also creates a historical file of all alarms and events.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eReporting\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eReports can be printed as required or scheduled to print at defined times such as at the change of an operator shift.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eTrending\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eTrends are provided to show a graphical view of collected data over a particular time period. Operators can track trend data from a single tank, such as temperature, pressure, level, flow, volume, etc., or a generic trend track can be created to show any data collected in the TacFuels system, such as levels for four different tanks simultaneously.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eDaily Reconciliation\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eTacFuels provides an inventory accounting ledger that assists site operators to accurately track, reconcile and report fuel inventory usage down to the vehicle level.\u003c\/p\u003e","brand":"SEI Industries","offers":[{"title":"Default Title","offer_id":43513429196859,"sku":null,"price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/5678\/3419\/files\/SEI_Industries_Fuel_Tank_Monitoring_System-1-1-1440x543.webp?v=1778762891"},{"product_id":"jungle-king-fuel-bladder","title":"Jungle King Fuel Bladder","description":"\u003ch4\u003eJungle-tough to withstand the effects of humidity, heat and sunlight\u003c\/h4\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Jungle King collapsible tank is specifically designed for liquid fuel storage in hot, humid, wet climates. Constructed from a high-durability fabric, using proprietary PetroH2Ohesive™ unique to SEI Industries, the Jungle King has excellent UV and hydrolysis resistance for a longer life expectancy than any other urethane collapsible fabric tank in the jungle.\u003c\/p\u003e\n\u003cp\u003eWith its green camouflage color and vent system to handle flash rainfalls, it is ideally suited for even the most extreme jungle conditions. These tanks combine portability and versatility with economy and are available in a full range of sizes from 250 USG (1000 L) to 33,000 USG (125,000 L). Multiple Jungle King tanks can be connected together through a manifold system to create a cost-effective tank farm with unlimited capacity.\u003c\/p\u003e\n\u003cp\u003eSEI Industries can supply the Jungle King as a stand-alone product or as part of a complete turnkey tropical fuel system which includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrimary storage tank with tropical vent\u003c\/li\u003e\n\u003cli\u003eSecondary containment berm\u003c\/li\u003e\n\u003cli\u003eRainwater filter system\u003c\/li\u003e\n\u003cli\u003eProtective sunshade\u003c\/li\u003e\n\u003cli\u003eFuel transfer, metering and filtration equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/h4\u003e\n\u003ch4\u003e\u003cstrong\u003eAbout the Fabric\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eJungle King tanks are constructed from a specialized fabric which was purpose-engineered by SEI for above-ground storage of fuels in jungle climates at remote sites. Exclusive Jungle King fabric exceeds US military specifications which provides a number of advantages that ultimately help to preserve fuel quality and extend equipment life and safety.\u003c\/p\u003e\n\u003cp\u003eJungle King fabric meets the \u003ca href=\"http:\/\/shop.csa.ca\/en\/canada\/fuel-burning-equipment\/b837-14\/invt\/27036272014\"\u003eCAN\/CSA B-837-14\u003c\/a\u003e standard for collapsible fabric storage tanks (bladders).\u003c\/p\u003e","brand":"SEI Industries","offers":[{"title":"Default Title","offer_id":43513434603579,"sku":null,"price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/5678\/3419\/files\/SEI_Industries_Jungle_King-1-1-1000x664.webp?v=1778763093"},{"product_id":"jungle-king-gas","title":"Jungle King Gas","description":"\u003ch2\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Jungle King Gas collapsible tank is purpose-built for gasoline fuel storage in hot, humid, wet climates. Constructed from a multi-coated, high-durability fabric using SEI’s proprietary PetroH2Ohesive™, the Jungle King Gas has an external coating with excellent UV and hydrolysis resistance and an internal coating, designed specifically for gasoline, that provides a longer life expectancy than any other urethane collapsible fabric tank in the jungle. Fully collapsible and easy to fold, transport and relocate, the Jungle King Gas requires minimal site preparation and saves on transportation costs, thanks to its lighter weight. It also won’t rust or corrode in wet environments, comes with a vent system to handle flash rainfalls and is available in a full range of sizes from 250 to 30,000 USG.\u003c\/p\u003e\n\u003cp\u003eComplete turnkey solutions for jungle fuel storage are also available and include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrimary storage tank with tropical vent\u003c\/li\u003e\n\u003cli\u003eSecondary containment berm\u003c\/li\u003e\n\u003cli\u003eRainwater filter system\u003c\/li\u003e\n\u003cli\u003eProtective sunshade\u003c\/li\u003e\n\u003cli\u003eFuel transfer, metering and filtration equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eAbout the Fabric\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe Jungle King Gas is constructed with a polyester-based polyurethane inner coating that is suitable for the storage of gasoline, gasohol or gasoline with ethanol. It also incorporates a polyether-based polyurethane outer coating that includes a hydrolysis-resistant adhesive coating that’s ideal for the jungle environment. Unlike traditional hot air welded lap seam or butt seam tanks, SEI’s unique 100 per cent radio-frequency welded cross-seam design ensures that the inside coating never meets the outside environment and vice versa.\u003c\/p\u003e","brand":"SEI Industries","offers":[{"title":"Default Title","offer_id":43513440763963,"sku":null,"price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/5678\/3419\/files\/SEI_Industries_Jungle_King_Gas-1-1-1440x1080.webp?v=1778763589"},{"product_id":"onion-tank","title":"Onion Tank","description":"\u003cdiv\u003e\n\u003ch4\u003eProtected potable water storage with two models to choose from\u003c\/h4\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eMilitary forces and industry rely on the Onion Tank for the storage of drinking water in remote locations and emergency situations. Capacities range from 264 USG to 3000 USG. This open-top tank is approved for potable water and is constructed of heavy-duty urethane coated fabric. Complete with a top cover (to prevent evaporation and contamination), the Onion Tank is fully collapsible and easily transportable.\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eTWO POTABLE WATER MODELS TO CHOOSE FROM\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe Onion Tank is available in two different models depending on the type of top cover selected:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnion Tank Standard:\u003c\/strong\u003e Top cover is supported with fiberglass battens and secured with shock cords.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnion Tank ZipperTOP:\u003c\/strong\u003e The ZipperTOP lid prevents dirt and debris from entering the tank and will not be blown away by high winds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eFABRIC OPTIONS\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAqua-Shield\u003c\/strong\u003e in 24 oz. mil-spec (PD-53048) material, 30 oz. NSF-approved material for potable water storage or 32 oz. mil-spec (Mil-T-53029C) material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChem-Shield\u003c\/strong\u003e in 30 oz. chemical-resistant material for grey or black water storage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"SEI Industries","offers":[{"title":"Default Title","offer_id":43513484345403,"sku":null,"price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/5678\/3419\/files\/SEI_Industries_Onion_Tank-1-1000x750.webp?v=1778763808"},{"product_id":"sunshade","title":"SunShade","description":"\u003ch4\u003eProtect your pillow tank against UV damage with a SunShade cover\u003c\/h4\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eSunShades are designed as protective covers for collapsible bladder\/pillow tanks and come in colors green, tan or black. White is also available on special order.\u003c\/p\u003e\n\u003cp\u003eUV Rays can damage collapsible fabric pillow or bladder tanks and can reduce their lifespan. SunShades reduce UV damage by 80%, significantly extending the service life of the tank. SunShades are ideal for any location where extended periods of sunshine exist. SunShades wrap over the top of the tank and around its fittings, for a perfect fit that hugs the tank. The SunShade is easy to install and can be attached when the tank is empty or full. Because the cover is secured to the tank’s handles, it does not blow away in windy conditions.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eUV Damage\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eUltraviolet damage is a chemical reaction or process in which polymers break down into shorter chains resulting in cracking, yellowing and erosion of the exposed surface of the tank. This process causes the fabric to stiffen and is accelerated by dirt on the surface of the tank. UV damage can be visually identified by a change in the tank colour which will become darker. Eventually, these “burnt” areas will grow stiff and crack, allowing liquid to escape.\u003c\/p\u003e\n","brand":"SEI Industries","offers":[{"title":"Default Title","offer_id":43513526878267,"sku":null,"price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/5678\/3419\/files\/SEI_Industries_Sunshade-1-1440x1114.webp?v=1778764182"},{"product_id":"terra-tank","title":"Terra Tank","description":"\u003ch4\u003ePortable Water and Chemical bladder storage tanks\u003c\/h4\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eWe designed the Terra Tank specifically to store water, chemicals or fuel. This collapsible bladder tank comes in a range of sizes from 250 USG (1000L) to 50,000 USG (190,000L). You can connect multiple Terra tanks together through a manifold system to create a cost-effective tank farm with unlimited capacity.\u003c\/p\u003e\n\u003cp\u003eWe build the Terra Tanks with one of several kinds of fabric, dependent on what liquid you need to store. We use two types of fabric to make Terra Tanks that store water and chemicals: Aqua-Shield™ and Chem-Shield™.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAqua-Shield\u003c\/strong\u003e – The National Sanitation Foundation approved the materials in this fabric for containment of potable water. Aqua-Shield fabric that meets U.S. military specification MIL-T-53029C is also available.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChem-Shield\u003c\/strong\u003e – This fabric is constructed from materials that combine excellent durability with resistance to many chemicals. Therefore, it is suitable for containment of sludge, transformer mineral oil, sulphuric acid, PCB transformer oils, 30% chlorine, ammonium hydroxide, ethanol and fertilizer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSEI Industries can supply the Terra Tank as a stand-alone product or as part of a complete turnkey system that includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrimary storage tank with vent\u003c\/li\u003e\n\u003cli\u003eSecondary containment berm\u003c\/li\u003e\n\u003cli\u003eRainwater filter system\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e\u003cstrong\u003eWater Storage\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eBladder tanks for water fall into three distinct use categories: potable (drinking water), grey and black water.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePotable water \u003c\/strong\u003eis drinking water. Potable water pillow tanks may be constructed from fabrics that are commercial or military grade but should be \u003ca href=\"http:\/\/www.nsf.org\/business\/mechanical_plumbing\/standardsnum.asp?program=MechanicalPluSysCom\"\u003eNational Sanitation Foundation (NSF) standard 61\u003c\/a\u003e approved.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGreywater \u003c\/strong\u003eis wastewater from domestic activities such as laundry, dishwashing, and bathing. It can also include waste water that includes chemicals or “produced water” generated from frac operations. Grey water bladder tanks should be constructed from a fabric that is compatible with the types of chemicals that the tank will contain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack water \u003c\/strong\u003eis used to describe wastewater containing fecal matter and urine (also known as brown water, foul water or sewage).Bladder tanks, made for the storage of black water, should utilize fabrics compatible for such exposure but also be capable of handling the heat generated as a result of bioactivity during decomposition of the sewage. Operators should also ensure that the bladder tank is installed inside proper secondary containment to \u003ca href=\"https:\/\/www.sei-ind.com\/products\/spill-prevention-response\"\u003eprevent spills into the environment\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSEI constructs its Terra Tank for water storage from Aqua-Shield, a fabric that is safe, durable and approved.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eChemical Storage\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eBladder tanks for storage of chemicals need to be constructed using fabrics, flanges and fittings that are suitable for exposure to the chemicals being stored. We construct the Terra Tank to store chemicals from Chem-Shield, a fabric that is proven, reliable and chemical-resistance. The tank is suitable for containment of sludge, transformer mineral oil, sulphuric acid, PCB transformer oils, 30% chlorine, ammonium hydroxide, ethanol and fertilizer.\u003c\/p\u003e\n\u003cp\u003eWe designed the Terra Tank so that the fabric of the tank always hugs the surface of the contained fluid. As a result, only a few square inches of liquid gets direct air exposure. This is an important feature for chemical storage, as there is virtually no area where water vapour can condense and, likewise, dangerous vapours cannot accumulate, as the tank continuously adjusts itself to whatever volume of liquid is in storage.\u003c\/p\u003e","brand":"SEI Industries","offers":[{"title":"Default Title","offer_id":43513536315451,"sku":null,"price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/5678\/3419\/files\/SEI_Industries_Terra_Tank-1-1000x750.webp?v=1778764431"}],"url":"https:\/\/dartaerospace.com\/collections\/fuel-and-water-storage-transport.oembed","provider":"Dart Aerospace","version":"1.0","type":"link"}